En-10
A
A
9. GRILLE INSTALLATION
1. INSTALLING BLOWER COVER INSULATION (IN CASE OF 2 OR 3 OUTLET DIRECTION)
•
Install the blower cover insulation only when the outlet direction
is changed to 2 or 3 direction.
•
Two blower cover insulations are packed with the grille assem-
bly.
•
Install the blower cover insulation at the diffuser position shown
in Fig. 13. At this time, use pipe side as the criteria.
Fig. 13
2. INSTALLING GRILLE ASSEMBLY TO BODY
Hang the grille assembly on the wires attached to the indoor unit as shown in Fig. 14.
Fig. 14
3 direction
Fit the blower cover
insulation.
Blower cover
insulation
A-A Section view
Wire
Wire hook
Motor cover assembly
Wire
Wire
hook
Example
Wire hook
CAUTION
•
Do not install the blower cover insulation at the diffuser position on pipe side.
•
Do not set the 2-way outlet as shown in the figure to the right. Setting in this
manner will cause performance problems.
Pipe
Pipe side
Pipe side
Do not
install here.
Pipe
Main
body
