background image

THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,

 

AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU’S PRIOR WRITTEN CONSENT.

TeamPoS7000_User Guide (F-Series)_D900000477.pdf

Revision 1.0 - June 1, 2012

Appendix  - v

Warning Symbols

To ensure that users understand the safety-related information presented in this manual, it uses 
warnings and warning symbols that indicate the nature of any danger.

The warning symbols used are defined as follows. Make sure that you understand the meaning 
of these symbols before reading the rest of the manual. 

This warning symbol indicates that there is a risk of electric shock.

This warning symbol indicates that there is a risk of fire.

This warning symbol indicates that problems could arise if you touch the 
area concerned.

This warning symbol indicates that the unit must not be disassembled 
since there is a risk of electric shock or other danger.

This warning symbol indicates a general prohibition other than those 
above.

This warning symbol indicates a general warning.

This warning symbol instructs the user to unplug the power cord since 
there is a risk of electric shock and other danger.

Содержание 7000 F-Series



















































Отзывы: