Fujitsu 68.6 cm (27"), Руководство по эксплуатации

Страница: 3 / 343

OSD-description
Operating the OSD
When putting the monitor into operation for the first time, the screen display should be optimally
adapted to the screen controller used and adjusted in accordance with your needs.
Changing the monitor settings with the buttons
of the control panel
After monitor turned on or at normal use, only the LED for the power button is illuminating (green =
ECO “ON”, blue = ECO “OFF”).
I
Power switch and
indicator (LED)
After pressing on the sensor key button , the other LED’s will illuminate and the description of
the sensor keys will appear at the OSD.
I I__________I__________I___________I__________I
to OSD menu Hotkeys
Hotkey – Functions
ECO mode
When user presses ECO key, ECO mode is switched on and off, depending of its previous state.
By pressing the ECO key, the brightness will be automatically adjusted to preset level, the sensor
key LED’s will illuminate in green and other controls are set as below:
•
Change colour temp to 6500K (default setting )
•
Change mode to office ( default setting )
•
Change brightness (backlight) setting to ECO definition (defined brightness).
•
Show message window "ECO on”
When OSD Brightness, colour temp or colour engine mode setting is changed from the OSD, ECO
mode is switched off and its respective status is shown under “Information”. Exception is 7500K
colour temp, which still keeps ECO mode on, if changed from 6500K CCT.
Switch ECO mode off by softkey: Change brightness to max value or to last known brightness setting
(as set before activating ECO function) and the sensor key LED’s will illuminate in blue.