Fujitsu 6010N - fi - Document Scanner, Руководство оператора

Страница: 43 / 663

1.2 Part Names and Functions
fi-6010N Network Scanner Operator's Guide 5
1
No. Part name Function
1
Startup button Turns on scanner or brings up the "Login" screen from
standby mode. For details, refer to
"2.2.1 Using the Startup
Button" (page 26) .
2 [SCAN] button Starts the scan process.
For details, refer to
"2.2.2 Using the Top Cover [SCAN] But-
ton" (page 27) .
3
LCD touch panel Accepts user input and displays the scanner control screens.
The LCD touch panel buttons are used to setup scans. For
details, refer to
"2.3 Using the LCD Touch Panel" (page 28) .
4 Keyboard Used to enter text in the control screen input fields.
May also be used instead of the touch panel to operate the
control screens. For details, refer to
"2.4 Using the Keyboard"
(page 29) .
5
Output tray Scanned documents are ejected from the ADF onto this tray.
Small documents may be retrieved by lifting up the keyboard
after scanning has completed.
6 ADF paper chute Holds the documents waiting to be scanned (scan side down).
7
Side guides Adjust to the width of the paper, to prevent skewing of the
scanned pages.
8 Top cover Frames the LCD touch panel, and covers the upper scanner/
ADF mechanism. Must be opened to clean inside the scanner,
or when replacing consumable parts.
9
ADF release button Push to unlock the top cover.
10 Back cover When connecting cables, press the tabs on both sides of the
back cover to unlock it, and pull it out from the scanner.
11
Security cable slot Slot for commercially available security cable to prevent
against theft.
The following security cable is recommended.
Type: Right angle
Cylindrical part: diameter 25mm (max), length 50mm (max)
(includes bent part if a straight cable is used)
12 AC adaptor connector Connects the scanner to the AC adaptor.
13
LAN connector Connects the scanner to the network.