Fujitsu 5000 Series Скачать руководство пользователя страница 33

Страница: 33 / 82

Point

To install a memory module, set up the PC, turn off the power, remove the AC power cord from
the outlet and install the memory module.

WARNING

●

To prevent electric shock, before installing and removing memory modules,

turn off the PC and connected units and unplug power cords from respective

outlets.

●

To prevent electric shock, fire, and/or malfunction, install only Fujitsu brand

memory modules in the PC.

CAUTION

●

To prevent personal injury and/or malfunction, when installing and removing

memory modules, only remove screws from specified locations.

●

To prevent injury and/or malfunction, do not touch PC board components not

specified.

Electric shock

Injury

2 Installing Memory Modules

This section explains how to install and remove additional memory modules. Memory expansion in
your PC increases the amount of data to be read and enhances the throughput of the PC.

DIMM 1

DIMM 2

Содержание 5000 Series



















































































Результаты поиска

Содержание 5000 Series

Отзывы:

Fujitsu 5000 Series, Руководство пользователя, Страница: 33 / 82

Результаты поиска

Содержание 5000 Series

Отзывы: