10
■
Turning off the power via Windows 98
1
Click [Start].
The "Start" menu appears.
This section explains how to turn off the PC.
¤
¤
¤
¤
¤
Point
- Before turning off the power, terminate all jobs and save all necessary data.
- Before turning off the power, confirm that the access indicator lamps (
see Appendix 1, "Name
and Function of Each Component") of the floppy and hard disk drives are off. If the power is
turned off while the access indicator lamps are on, data may be lost or data in the floppy disk or
hard disk may be destroyed.
- If the power cord is unplugged from the outlet or the power is disconnected due to a power failure
while the PC is on, re-connect he power cord or wait until AC power recovers. When the power
recovers, the PC is automatically turned on and started. "Press <F2> to enter SETUP" may be
displayed at this time. In this case, press the [F2] key, check the Setup items from the menu,
and restart the PC.
- Do not turn off the PC while the POST is operating. To switch off the PC while the POST is
operating, press the power switch for at least four seconds and confirm that the power lamp
goes off.
- If the power is turned off during the POST operation due to a power failure or some other reason,
the message, [Press <F1> to resume, <F2> to setup], may be displayed at rebooting. In this
case, press [F2] key, confirm the setup menu, and then reboot.
- If the power lamp is on in orange, repress the power switch for at least four seconds.
For Windows 98
2 Switching off
