Fujitsu 38B2-M, Руководство пользователя

Страница: 10 / 21

Colour monitor 38B2-M
8 - English
A26361-K853-Z200-1-5E19
1
2
3
4a
4b
5
Ê
Be sure that the monitor and the computer are switched off.
!
The computer power plug must be pulled out!
The permanently connected data cable is equipped with a 15-pin D-SUB plug for connection to the
computer.
Ê Connect the connector of the data cable (1) to the active monitor port on the computer and
secure the plug-in connection by tightening the safety screws.
i
If your computer has two monitor ports ("onboard" screen controller and separate
graphics card), the monitor port for the separate graphics card is usually active.
Ê Plug the power adapter cable (2) into the power connector of the monitor.
Ê Firmly insert the socket with the power cable supplied into the power cable connection of the
power adapter (3) and check whether the socket is securely seated.
Ê Depending on the version, plug the plug of the power cable into the monitor mains outlet of the
computer (4a) or into a properly grounded mains outlet (4b).
Ê Insert the audio cable plug in the AUDIO IN socket (5) of the monitor.
Ê
Insert the other audio cable plug in the corresponding port of your computer and make sure it
engages properly.
Ê
Plug the power connector of the computer into a properly grounded mains outlet.
i
When you start working with your monitor for the first time you should install the
appropriate graphics drivers for your application software. Details of how to do this are
provided in the documentation on your screen controller/the associated driver software.