Fujitsu 1740, Руководство пользователя

Страница: 134 / 136

134
4.6
Mounting Blank Panels
4.6.1 Confirming components
Confirm that all components have been delivered (see the table below).
Also, prepare the necessary tools:
・
Phillips screwdriver (No. 3 bit)
・
Cage nut tool
4.6.2 Mounting blank panels
1
Attach cage nuts to the rack front left and right posts from the rear side.
The rack post has three square holes per height of 1U. According to the size of blank panel,
attach cage nuts to the following positions:
・
1U: Two center holes on left and right
・
2U: One center hole each at 1U and 2U, four in total on left and right
・
3U: One center hole each at 1U and 3U, four in total on left and right
2
Secure the blank panel with M6 screws.
Secure the blank panels with screws through the holes corresponding to the cage nuts
attached in step 1.
’
`
The figure shows a general representation of 1U, 2U, and 3U blank panels. In
actual work, select and mount the appropriate size of blank panel according to the
available space.
Product name Type name Component and quantity
1U blank panel 19R-16BP1 1U blank panel x 1, M6 cage nut x 2, M6 screw x 2
2U blank panel 19R-16BP2 2U blank panel x 1, M6 cage nut x 4, M6 screw x 4
3U blank panel 19R-16BP3 3U blank panel x 1, M6 cage nut x 4, M6 screw x 4