Preparing the workstation for use
Unpacking and checking the delivery
12
A26391-K115-Z120-2-7619
Switching on the workstation for the first time
When you switch on your workstation for the first time the supplied software is installed and
configured. You should plan some time for this, as this process must not be interrupted.
!
Do not place the workstation on a soft surface (e.g., a carpet or soft furnishings). The
space between the workstation's feet must be clear.. Place the workstation on a flat,
stable, nonslippery surface.
Do not place the power adapter on heat-sensitive material.
The workstation and the power adapter should be at least 200 mm apart.
Keep other objects 100 mm away from the workstation and its
power adapter
to ensure
adequate ventilation.
Never cover the fan intake or exhaust openings of the workstation or the power adapter.
The power cable supplied conforms to the requirements of the country in which you
purchased your workstation. Make sure that the power cable is approved for use in the
country in which you intend to use it.
The power adapter's AC cord should only be connected to a mains outlet if the
workstation is already connected to the power adapter.
Do not expose the workstation to extreme environmental conditions. Protect it from dust,
humidity and heat.
Upon delivery, the battery can be found in the battery compartment and is not charged.
Ê
Place the workstation on a flat, stable, nonslippery surface.
2
1
Ê
Press the release button (1) and open the LED display panel (2).
