Fujitsu Siemens Computers PRIMERGY TX120, Инструкция по настройкам

Страница: 19 / 61

TX120
Options Guide 19
4 Preparation
V
CAUTION!
Please note the safety instructions in chapter “Safety” on page 13 .
4.1 Opening the server
Ê
Exit all applications and shut down the server properly.
Ê
Press the On/Off button if the server has not been switched off by the
operating system.
Ê Unplug all power plugs.
Ê Disconnect all cables on the rear of the server.
Figure 2: Opening the server
Ê Remove the stabilizers from the server (see operating manual) and place the
server on its four rubber feet (1), if the server is operated in the vertical
position.
Ê
Press and hold in the locks on both sides of the server (2), push the top
cover forwards and lift it up and off (3).
1
2
3