background image

TX120

Operating Manual

27

Important information

Safety

Modules with Electrostatic-Sensitive Devices

Modules with electrostatic-sensitive devices are identified by the following 
sticker:

Figure 1: ESD label

When you handle components fitted with ESDs, you must always observe the 
following points:

Switch off the system and remove the power plugs from the power outlets 
before installing or removing components with ESDs.

You must always discharge static build-up (e.g. by touching a grounded 
object) before working with such components.

Any devices or tools that are used must be free of electrostatic charge.

Wear a suitable grounding cable that connects you to the external chassis of 
the system unit.

Always hold components with ESDs at the edges or at the points marked 
green (touch points).

Do not touch any connectors or conduction paths on an ESD.

Place all the components on a pad which is free of electrostatic charge.

I

For a detailed description of how to handle ESD components, see the 
relevant European or international standards (EN 61340-5-1, 
ANSI/ESD S20.20).

Содержание PRIMERGY TX120



















































































Отзывы: