Fujitsu Siemens Computers PRIMERGY SX30, Руководство по эксплуатации

Страница: 37 / 101

U41169-J-Z156-4-74
37
Power Supply Power Supply Units
Fitting is the reverse of removal:
Ê
Push the new power supply unit into the empty slot (see next section “Adding
a Power Supply Unit” ).
V
CAUTION!
Please ensure that the power supply unit engages correctly in the
mounting frame and is locked in position. This is the only way to avoid
the power supply unit being shaken out of its mountings and
damaged during transport.
Ê Connect the lead to the power supply unit (see the section “Mains
Connection” on page 63
Ê
Connect the power cable to the mains (see section “Mains Connection” on
page 63 ).
5.1.2 Adding a Power Supply Unit
For a non-redundant power supply system (only one power supply unit
installed), the slot for an additional power supply unit contains a dummy unit.
This dummy unit must be removed.
Figure 13: Dummy Unit
Ê Raise the catch on the dummy unit and pull it out of the slot.