Options Guide
45
10
Completion
V
CAUTION!
Please observe the safety information in the chapter “Safety Instructions”
on page 9ff.
10.1
Closing the server
Figure 25: Installing the cover
Ê
Position the cover in such a way that the rear edge protrudes 3-4 cm from
the housing.
Ê
Push the cover to the front as far as it will go.
Ê
Attach the cover with the knurled screw (see circle in figure) at the back of
the housing.
Ê
Install the server in the rack.
I
How to install the server in the rack is described in the operating
manual.