Options Guide
27
Processors
Exchanging the heat sink
6.3
Exchanging the heat sink
Ê
Open the server as described in the chapter “Preparation” on page 15f.
Ê
Remove the ventilation duct (see page 20).
Ê
Remove the four screws of the heat sink in diagonally opposite sequence
(see page 24).
Ê
Turn the heat sink carefully back and forth to loosen it. Then lift it out to
remove it.
Ê
Clean the surface of the processor with a lint-free cloth.
Ê
Fit the heat sink on the processor such that the side labeled “FRONT” is
facing the front of the server (see page 23).
Ê
Attach the heat sink with four screws. Tighten the screws in diagonally
opposite sequence (see page 23).
Ê
Reinstall the ventilation duct (see page 20).
Ê
Close the server, plug in the power plugs, and switch on the server as
described in the chapter “Completion” on page 45f.
