Fujitsu Siemens Computers PRIMERGY Econel 50, Руководство по эксплуатации

Страница: 23 / 40

A26361-K831-Z502-1-7619
19
Operation
Switching the server on
Ê
If necessary, switch the monitor on (see the operating manual for the monitor).
Ê
Switch the server on with the main switch at the rear of the server.
Ê
Press the ON/OFF button on the front of the server.
The power-on indicator lights green (see "Indicators on the server" section) and the server is started.
Switching the server off
Ê
Shut down the operating system properly.
Ê
If the server operating system does not switch off automatically, use the ON/OFF button to
switch off the server when requested.
Ê
Switch the server off at the main switch at the rear of the server.
!
CAUTION!
The main switch and the ON/OFF button do not disconnect the server from the mains
voltage. To completely disconnect the mains voltage, remove the power plug from the
socket.
Ê
If necessary, switch the monitor off (see the operating manual for the monitor).
Placing a server (with soft power off function) in a ready-to-operate state by means of
software
With the soft power off function the server automatically switches off (standby) or switches into the
energy-saving mode after the operating system is shut down. Requirements: Your system must
support switching off with software and this functionality must be enabled in
BIOS Setup
.
You can also switch your server into the standby mode via
ServerView
and/or
RemoteView.