A26361-K970-Z102-2-7619
33
Preparation for use and operation
Switching the Server ON/OFF
Switching the server OFF (non ACPI-compatible operating systems)
Power-on indicator (position 2 on figure 4 on page 29) lights green.
Ê
Shut down the operating system in an orderly manner.
The server remains switched ON and the power-on indicator remains green.
Ê
Press the ON/OFF button (position 1 in figure 4 on page 29) or use one of
the procedures described in “Other ON/OFF possibilities” on page 33.
The server switches OFF and goes to standby mode. The power-on
indicator lights orange.
Other ON/OFF possibilities
In addition to the ON/OFF button, the server can be switched ON and OFF in
the following ways:
–
Specified switch-On time/switch-OFF time
The server is automatically switched ON or OFF at a time specified in the
ServerView
program.
–
Ring indicator
The server is switched ON via an internal or external modem.
–
Wakeup On LAN (WOL)
The server is switched ON by a command via the LAN.
–
After power failure
The server automatically switches ON following a power failure (depending
of the settings in the BIOS).
–
Power override function
The system may be switched OFF "unconditionally" by pressing the ON/OFF
button for about 4 to 5 seconds.
V
CAUTION!
Data loss may occur!
