Installing and removing drives
System expansions
A26361-K831-Z100-1-7619
43
i
You may have to check the entry for the drive in the
BIOS Setup
.
Mounting a hard disk drive in a 5¼" slot
i
To do this, you require a special mounting frame.
Ê
Open the system unit (see "
Opening the system unit
").
Ê
Make the required settings (e.g. master-slave) on the hard disk drives.
1
1
Ê
Fasten the drive with the four screws in the installation frame.
Ê
Install the installation frame with the drive in the desired 5¼" slot (see "
Installing an accessible
drive
").
Ê
Close the slot with the panel. Ensure that the cover engages.
Ê
Close the system unit (see "
Assembling the system unit
").
