Fujitsu Siemens Computers Pocket LOOX 710, Руководство по эксплуатации

Страница: 69 / 75

Troubleshooting and tips
A26391-K151-Z120-1-7619, edition 5
61
The Pocket PC stops working
If the Pocket PC stops working, this may have the following reasons:
An application programme has caused the malfunction
► Restart the Pocket PC (see the section "Switching on and off with soft reset (warm boot)").
or
► If the restart does not function, reset the Pocket PC to the delivered state (see the section
"Resetting Pocket PC to delivered state").
!
When you reset the Pocket PC to the delivered state, your data are lost!
Therefore, remember to make a regular data backup with synchronisation (see the section
"Synchronising data with ActiveSync") or on corresponding memory cards (available as an
accessory). The program
FSC Backup
is provided on your Pocket PC for completely
backing up the RAM memory.
The battery is dead
► Connect the PSC11R-050 power adapter to the Pocket PC to charge the battery.
Or
► Connect the PSC11R-050 power adapter to the cradle and insert the Pocket PC in the cradle
to charge the battery.
The battery discharges too quickly
The battery is either too hot or too cold
► Bring the Pocket PC up / down to a normal temperature again.
If the operating time of the battery mode is extremely short, the battery is probably old and should
be replaced. Please contact your dealer for a new battery.
The Suspend/Resume button does not respond properly
You have pressed and held the Suspend/Resume button too long to switch the Pocket PC on
or off
► Briefly press the Suspend/Resume button until the Pocket PC switches on or off.