Fujitsu Siemens Computers Lifebook C Series, Начало работы

Страница: 14 / 21

C Series
6 - English
A26391-K110-Z100-2-7619
Switching on the notebook for the first time
When you switch on your notebook for the first time, the supplied software is installed and
configured. You should plan some time for this, as this process must not be interrupted.
To simplify the initial start-up of your notebook, one or two operating systems are preinstalled on the
hard disk (dual-installation). If two operating systems are preinstalled, you can select which of the
two operating systems you want to install during initial start-up.
i
The selection of the operating system cannot then be reversed.
a
Ê
Press the Suspend/Resume button to switch on the notebook (1).
The power-on indicator of the notebook appears in the status indicator panel (a).
!
After switch-on a self-test (POST, Power On Self Test) is automatically carried out. Never
switch the notebook off during the self-test.
Leave the external power adapter connected to your notebook during the initial
installation.
Once the installation has been started, the notebook must not be switched off!
During installation, the notebook may only be rebooted when you are requested to do so!
Ê
During installation, follow the instructions on screen.
Downloaded from LpManual.com Manuals