Fujitsu Siemens Computers ESPRIMO C, Руководство по эксплуатации

Страница: 26 / 76

Operation
18 A26361-K1009-Z120-1-7619, edition 4
Indicators provided by the device
The indicators are on the front of the casing. Which indicators are available on your device depends
on the configuration level you have selected.
1
3
4
2
1 = Power-on indicator
2 = Hard disk indicator 3 = SmartCard reader indicator
4 = DVD indicator
1 - Power-on indicator
– The indicator is green:
The device is on.
i
The display can also light up green if the device has been switched off by
holding the ON/OFF switch (see "
Fehler! Kein gültiges Resultat für
Tabelle. ").
– Indicator lights up orange or flashes green (depending on the type of device):
Device is in power-saving mode. After being switched on with the power button, the
device will either switch on or return to the state it was in before the energy-saving mode.
!
In an energy-saving mode the device must not be switched off with the main switch
or disconnected from the mains supply, as this may result in data loss.
– The indicator does not light up:
The device is switched off (main switch at 0 or disconnected from the power supply) or
ready-to-operate. If your device is ready-to-operate it can be enabled with the ON/OFF
switch.
2 - Hard disk indicator
The indicator lights up when the hard disk of the device is accessed.
3 - DVD indicator
The indicator lights up when the DVD drive in the device is being accessed. Never remove the DVD
while the indicator is lit.
4 - SmartCard reader indicator (optional)
The indicator lights up if a SmartCard is inserted.
The indicator flashes if no SmartCard is inserted.