background image

Operation

 

16

 

VFY-SCED103S, edition 1 

Indicators provided by the device 

The indicators are on the front of the casing. Which indicators are available on your device depends 
on the configuration level you have selected. 

1

2

3

4

 

 

1 =  Drive indicator, e.g. DVD 
2 =  Floppy disk indicator 
3 =  Hard disk indicator 
4 =  Power-on indicator 

1 - Drive indicator, e.g. DVD 

The indicator lights up when the optical drive of the device is being accessed. You may only remove 
the CD/DVD when the indicator is dark. 

2 - Floppy disk indicator 

The indicator lights up when the floppy disk drive of the device is accessed. You may only remove 
the floppy disk when the indicator is unlit. 

3 - Hard disk indicator 

The indicator lights up when the hard disk of the device is accessed. 

4 -  Power-on indicator 

– 

The indicator is green: 
The device is on. 

i

 

The display can also light up green if the device has been switched off by 
holding the ON/OFF switch (see "Troubleshooting and tips"). 

 

– 

The indicator lights orange: 
The device is ready-to-operate or in energy-saving mode. After being switched on with 
the power button, the device switches on or returns to the state it was in before the 
energy-saving mode. 

!

 

In the energy-saving mode the device may not be disconnected from the mains 
supply, as this may otherwise result in data loss. 

 

– 

The indicator does not light up: 
The device is disconnected from the power supply or is ready for operation. If your device 
is ready-to-operate it can be enabled with the ON/OFF switch. 

Содержание Edition X103 SFF


















































Отзывы: