Fujitsu Siemens Computers D1570, Техническое руководство

Страница: 20 / 26

Add-on modules
Installing processor with heat sink
Ê
Remove the heat sink.
3
2
1
A
4
5
3
2
1
A
4
5
Ê
Pull the lever in the direction of the arrow (1) and lift it as far as it will go (2).
Ê
Remove the old processor from the socket (3).
Ê
Insert the new processor in the socket so that the angled corner of the processor matches the
coding on the socket (A) with regard to the position (4).
Ê
Push the lever back down until it clicks into place (5).
Mounting heat sink
If you are installing the heat sink you must ensure a good heat contact between heat sink and the
processor's surface. It is essential to use heat conducting paste between the processor and the heat
sink.
If you remove the heat sink, you must clean it (e.g. with benzine) and apply new heat conducting
paste before you remount it.
i
Only use the supplied heat sink and the supplied retaining clamps.
12 - English
A26361-D1570-Z120-2-7419