Fujitsu Siemens Computers AMILO Pro V Series, Легкое руководство

Страница: 23 / 26

Removing and installing components during servicing
Removing the hard disk
► Switch your notebook off.
Hard disk
► Close the LCD screen.
► Unplug the mains plug of the mains adapter from the mains socket.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on a stable, sturdy, fl at surface. If necessary, lay an
anti-slip cloth on this surface to prevent the notebook from being scratched.
► Remove the battery (see "Removing the battery", Page 12 ).
3
2
1
1
► Remove the screws (1).
► Lift off the cover (2).
► Pull the hard disk out of the bay in the
direction of the arrow (3).
Installing the hard disk
3
3
1
2
► Push the hard disk into the hard disk
bay (1) in a straight line.
► Position the cover (2).
► Secure the cover with the screws (3).
► Install the battery again (see "Battery: inserting", Page 12 ).
► Turn the notebook the right way up and place it on a fl at surface.
► Reconnect the cables that you disconnected previously.
A2 6391-K1 95-Z 120-1 -7619 , edition 1 1 5