8
Installation
2
Mount the body
Hook the keyholes of the hanger on the
washer-head wood screws, and tighten
the screws.
Cooker Hood Mounting
1
Screw in washer-head wood screws on the wall
Referring to "Dimensions" on page 5, insert the washer-head
wood screws (
∅
5.1
×
45) into the mounting wall for the left and
right keyholes of the hanger. Allow about 5mm space between
the wall and screwheads for hanging the cooker hood.
Washer-head
wood screw
Keyhole
5mm
Washer-head
Wood screw
3
Removing oil receiving cover
Grasp the oil receiving cover with one hand
at each end. Pull the top of the cover out
and down, and then lift the bottom of the
cover to detach it from the body.
Oil receiving cover
Catch
Note
Please use suitable accessories during installation
(refer to page 4).
May add or opt for other accessories as reinforcement
when necessary.
