Fujioh FR-FS1870V, Руководство по установке и эксплуатации

Страница: 8 / 36

8
Installation

Installation
1. Mount the cooker hood carefully and avoid contact with any metal parts (the lath in the wall or the
like) of the building.
2. Never embed the body of the cooker hood in the wall. Otherwise, leakage current in the wall, if any,
flows to the body of the cooker hood.
3. The air must not be discharged into a flue that is used for exhausting fumes from appliances burning
gas or other fuels (not applicable to appliances that only discharge the air back into the room).
4. The minimum distance between the supporting surface for the cooking vessels on the hob and the
lowest part of the cooker hood. When the cooker hood is located above a hob, this distance shall be
at least 750mm.
If the instructions for installation for the hob specify a greater distance, this has to be taken into
account.
5. Use a gas range having a narrower width than that of the cooker hood.
6. Avoid using the cooker hood with changes in the specification, for instance, with modifying the
switch.
7. Do not install the cooker hood in a wet area or in other wet rooms since it may result in electric
shock or damage.
8. Do not install the cooker hood at a place where its ambient temperature exceeds 40°C, otherwise it
may result in failure.
9. To protect your hands from injury, wear working gloves when installing the cooker hood.
10. If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
Preparation and Check before Installation
CAUTION
Checking mounting surface strength
The mounting surface should have sufficient strength enough to support the cooker hood.
Mount the cooker hood on a place durable to support the weight of the cooker hood.
[Product weight 19kg (FR-FS1870V), 21kg (FR-FS1890V), 20kg (FR-FS1890R)]

In the case of boarded wall
 If the thickness is more than 20mm, mount the cooker hood directly to the wall.
 If the thickness is less than 20mm, embed a reinforcing board and mount the cooker hood to
this board.
 In the case of a concrete/tile faced wall
 Embed a reinforcing board in the wall in advance, or use a curl plug or the like.
Power supply
• This product does not include a power plug. Please have a qualified technician attach a power plug to the
power cord.
• Be sure to use the wall outlet only for the cooker hood.
Checking accessory parts
Take out the main unit and accessory parts from the packing box, and check whether there is any shortage.