Fujioh FR-FS1870V, Руководство по установке и эксплуатации

Страница: 14 / 36

14
Maintenance
 Attaching
Rectifier Panel

Detaching
Loosen the mounting screws attaching the rectifier
panel, move the rectifier panel forward slightly to free the
mounting screws from the mounting guide holes and the
body catches.
Note
Make sure that the rectifier panel is fixed securely. It
may be a cause of dropping if not fixed firmly.
Note
In order not to drop the rectifier panel, hold it by both
hands securely. If dropped, it may be a cause of injury,
flaw or warp of parts, etc.
Holding the rectifier panel with both hands, place the
rear of the panel in front of the catches and in line with
the mounting guide holes. Then slide the panel back to
engage the mounting guides and attach the catches.
Tighten the mounting screw to attach the panel firmly.
Catch
Mounting screw
Rectifier panel
Mounting guide hole
Catch
Rectifier panel
Install all parts using the opposite procedure as that for removing the parts.
Oil Tray
Detaching
/
Attaching Cleaned Parts
Note
The tray may be filled with oil, so be careful when removing it.
Note
If the oil tray is not installed properly, it may result in oil-drip,
injury by dropping, etc.
 Attaching
Hold the tab and set the oil tray on the guide rail of the cooker
hood, then push it completely to the end.
 Detaching
Hold the oil tray at its tab and slide forward.
Oil tray
Oil tray