11
Installation
2) The mounted washer-head wood screw/
hanging screw is respectively hung in
the fixed bolt hole on the back of the
main unit.
Washer-head wood screw
(Ø5.1×45)
3) washer-head wood screws are screwed down,
and the 2 washer-head wood screws (Ø5.1×45)
are tightened in the two Ø9 holes below the
fixed bolt hole to fix the main unit.
* After installation, please confirm whether the
main unit is hung firmly.
Shutter opening
direction
Soft tape
Exhaust port
Fixing screws
(M4×8)
Ventilating type
1) Attach the supplied soft tape around the
exhaust port, then secure it with supplied
four fixing screws (M4×8).
When the recycling type is used, please refer to page 12.
Note
When attaching the exhaust port, pay
attention to its shutter opening direction.
If it's installed incorrectly, it may cause
bad discharge, abnormal noise, etc.
Correct
Wrong
