17
5
Align 4 screw holes
of the liner and
range hood, then
fix securely using
the supplied screws
(M5×30) and nuts.
Note
Fasten all the screws
and nuts evenly.
Liner
Nut with plate
Liner
[Securing plate
turns while
passing through
the opening
of Liner]
Securing plate
Nut with plate
[Right & left, each two (2) places]
Four screws
(M5
×
30)
INSTALLATION (continued)
6
Hold up the range hood, while
inserting the exhaust pipe unit into the
duct, pass all 4 threaded rods through
the holes of the mounting bracket.
7
Using washers, spring
washers, and double nuts,
attach the range hood
to all 4 threaded rods
securely.
Washer
*
Washer
*
Spring-
washer
*
Spring-
washer
*
Nut
*
Attachment
*
Not supplied
11/16" or less
Attachment
Note
If taping from the outside is impossible, remove the exhaust pipe unit and insert the
duct end to the range hood directly, then make inside taping on the duct end. Be sure
to attach a roof/wall cap with damper in this case.
