70S+A_Rev1
18
Basic Operation
In the case of use only with splicer
Use in a location which does not have vibration, a shock, etc. at the time of performing fusion
splice work. In work [at the unstable place where a main part is shaky], the possibility of
damage from a fall becomes high.
Sleeve Loader
Sleeve loader for holding the Protection sleeve during Splicing.
It is possible that there are dust, rain water, etc. depending on work environment, and
garbage, moisture, etc. mix to the protection sleeve under splice.
Putting a protection sleeve on the ground etc. directly by using a sleeve loader is lost, and
mixing of garbage or moisture can be prevented.
Moreover, since the protection sleeve was held near the connection position, workability
also became good.
The right-and-left side of equipment can attach to both.
Dusty environment
Environment of rain water
