8
How to attach the armrests (both left and right)
1.The armrest will be attached after the seat back is raised. Place the remote control and power cord to
the back of the chair between the casters.
2.Attach the air joints. Firmly insert the air joints into the outlets on the chair.
3.Attach the armrest to the chair. Apply from the side of the chair aligning the armrest holes with the attachment holes
on the chair.
Caution
Air leakage may occur unless the joints are
properly attached. Malfunction and injury may
also occur.
Be careful not to get the remote control cord or
power cord caught between the armrest and the
chair.
Attachment hole
Seat back
Armrest hole
< Left side >
Set the front portion of the armrest in place after
aligning the rear portion with the power box.
< Right side >
Set the front portion of the armrest in place after
aligning the rear portion with the caster.
Power box
Remote control
Power cord
Before Use
Caution
Be careful of the cord coming out of the
power box.
The cord must not
be dragged in
Outlet
Armrest (left)
Air Joint
Содержание CYBER-RELAX EC-3800
Страница 57: ...57 MEMO ...
Страница 58: ...58 MEMO ...
Страница 59: ...59 ...
Страница 60: ...13 01 31 1 ...