FujiFilm X-E3, Руководство пользователя

Страница: 330 / 360

310
T
echnical Not
es
12
Wireless Network and Bluetooth Devices: Cautions
This product complies with the following EU
Directives:
•
RoHS Directive 2011/65/EU
•
RE Directive 2014/53/EU
Hereby, FUJIFILM Corporation declares that the
radio equipment type FF170001 is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address:
http://
www.fujifilm.com/products/digital_cameras/x/
fujifilm_x_e3/pdf/index/fujifilm_x_e3_cod.pdf
This compliance is indicated by the following
conformity marking placed on the product:
This marking is valid for non-Telecom products and
EU harmonized Telecom products (e.g. Bluetooth®).
IMPORTANT : Read the following notices before using
the camera’s built-in wireless transmitter.
Q
This product, which contains encryption
function developed in the United States,
is controlled by the United States Export
Administration Regulations and may not be ex-
ported or re-exported to any country to which
the United States embargoes goods.
•
Use only a wireless network or Bluetooth device Use only a wireless network or Bluetooth device..
FUJIFILM does not accept liability for damages
resulting from unauthorized use. Do not use
in applications requiring a high degree of reli-
ability, for example in medical devices or other
systems that may directly or indirectly impact
human life. When using the device in comput-
er and other systems that demand a greater
degree of reliability than off ered by wireless
network or Bluetooth devices, be sure to take
all necessary precautions to ensure safety and
prevent malfunction.
•
Use only in the country in which the device was Use only in the country in which the device was
purchased.
purchased. This device conforms to regulations
governing wireless network and Bluetooth de-
vices in the country in which it was purchased.
Observe all location regulations when using the
device. FUJIFILM does not accept liability for
problems arising from use in other jurisdictions.
•
Do not use the device in locations subject to mag- Do not use the device in locations subject to mag-
netic fi elds, static electricity, or radio interference.
netic fi elds, static electricity, or radio interference.
Do not use the transmitter in the vicinity of mi-
crowave ovens or in other locations subject to
magnetic fi elds, static electricity, or radio inter-
ference that may prevent reception of wireless
signals. Mutual interference may occur when
the transmitter is used in the vicinity of other
wireless devices operating in the 2.4 GHz band.
•
The wireless transmitter operates in the 2.4 GHz The wireless transmitter operates in the 2.4 GHz
band using DSSS, OFDM and GFSK modulation.
band using DSSS, OFDM and GFSK modulation.
•
Security : Wireless network and Bluetooth de-
vices transmit data via radio and consequently
their use requires greater attention to security
than applies in the case of wired networks.
-
Do not connect to unknown networks or
networks to which you do not have access
rights, even if they are displayed on your
device, as such access may be considered
unauthorized. Connect only to networks to
which you have access rights.
-
Be aware that wireless transmissions may be
vulnerable to interception by third parties.
•
The following may be punishable by law: The following may be punishable by law:
-
Disassembly or modifi cation or this device
-
Removal of device certifi cation labels
•
This device operates on the same frequency as com- This device operates on the same frequency as com-
mercial, educational, and medical devices and wire-
mercial, educational, and medical devices and wire-
less transmitters.
less transmitters. It also operates on the same
frequency as licensed transmitters and special
unlicensed low-voltage transmitters used in
RFID tracking systems for assembly lines and in
other similar applications.