EN-13
SU1810_case BL00543-102(
1
)
ENGLISH
Conducting a final test
Carry out a final submersion test on the waterproof case after mounting the
digital camera. To check for water leaks, watch for any water leaking in while
immersing it in a water tank or a bathtub filled with water. Check it in a way
that lets you take it out of water immediately (to save the camera inside) if you
need to.
1
Immerse it in water for 30 seconds.
• If you see a continuous flow of
air bubbles from the joint of the
waterproof case while in the water,
this indicates a leak.
• When all is well, operate the
buttons and take some test shots
while it is under water.
2
After slowly lifting the waterproof case out of water, closely check
for the following:
• Water droplets near the joint of the
waterproof case.
• Water pooled inside the waterproof
case.
Dip it slowly in
water.
Joint
Water
droplets
02̲F30̲Wcase̲EN.indd 13
02̲F30̲Wcase̲EN.indd 13
2006/10/10 13:12:33
2006/10/10 13:12:33
