EN-12
SU1810_case BL00543-102(
1
)
Positioning the Digital Camera in the Waterproof Case
3
Insert the silica gel pack into the space underneath the bottom of
the camera.
Make sure to insert the silica gel
pack correctly. If it is incompletely
inserted, it will prevent the O-ring
from acting as a seal, and water will
leak in.
4
Confirm the following before closing the waterproof case.
• No part of the silica gel pack is
protruding.
• There is no dust, hair, or other
foreign particle on the O-ring, in
the O-ring groove, or on the edge
face of the waterproof case that
engages with the O-ring.
• The camera is correctly seated and
aligned in the waterproof case.
5
When all is well, close the waterproof case (p.10).
→
Check that the camera’s “POWER” button and Mode dial can be correctly
operated using the controls on the housing.
To prevent water leaks
Any foreign particles attached to
the O-ring may cause a water leak.
Remove the foreign particles (see
p.22). If you cannot remove them,
replace the O-ring with a new one.
Silica gel pack
Silica gel pack
O-ring
Hair
Lint
Sand
02̲F30̲Wcase̲EN.indd 12
02̲F30̲Wcase̲EN.indd 12
2006/10/10 13:12:33
2006/10/10 13:12:33
