FujiFilm UA107x8.4BESM-T35K, Руководство по эксплуатации

Страница: 33 / 94

- v -
(4) Selection of Camera
The behavior of the intercom select switch in an accessory differs by types of camera. If required, change the setting
of dip switch (S710-7) on the A-board in the lens according to the type of camera.
At the factory, the switch is set to
“
TYPE 1.
”
The circuits relative to the dip switch are shown below.
Ⅰ
. TYPE 1 CAMERA : BVP-270 series (NTSC) and BVP-370 series (NTSC)
Ⅱ
. TYPE 2 CAMERA : BVP-370 series (PAL)
Note. If the camera is of TYPE 2, set the intercom select switch on the camera side to
“
PD.
”
At the position of
“
ENG,
” “
PD
”
can not be selected from a zoom rate demand unit.
S710
A-BOARD
OFF: Camera Type 1
ON: Camera Type 2
Setting of Dip Switch (S710-7)
A-BOARD
PRIOR TO USE
ENG
PD
INCOM 1 SW
INCOM 2 SW
( Ex. ERD-5A-D01/ERD-5A-D11 )
ENG
PD
INCOM SETTING LINE
INCOM (1) SW
( Ex. ERD-5A-D01/ERD-5A-D11 )
ACCESSORY LENS CAMERA
ACCESSORY LENS CAMERA