FujiFilm instax SHARE SP-3, Руководство пользователя

Страница: 19 / 170

19
EN
Printed pictures
Problems Possible Causes Solutions
Part or whole finished
print is white. ●
The back cover was opened before
you have used up the film.
●
Do not open the back cover until you have used
up the film; otherwise, the rest of the film may be
exposed and ruined for use.
The picture is blurred. 1
Pressure was applied to the picture
immediately after it came out from
the printer.
2
The picture did not come out
smoothly.
1
Do not shake, bend, fold, or press the print.
2
Do not cover the film exit.
A black line is printed
on the bottom of the
finished print. ● The printer shakes or has been
dropped and the film has become
misaligned.
● Retransmit the image. If this does not solve the
problem, load a new film pack.
A vertical line is printed
across the finished print. ● The print head is dirty. ● Contact your FUJIFILM dealer or support center.
instax_BO-C_6lang.indb 19 instax_BO-C_6lang.indb 19 2017/9/14 15:21:13 2017/9/14 15:21:13