FujiFilm Fujinon UA14X4.5BERD-S6B, Руководство по эксплуатации

Страница: 56 / 124

- E-0 -
7.5.1 Setting of Zoom Limit Positions
a. If the zoom lmt ON/OFF swtch (SW-) s set
to “OFF,” change t to “ON” poston.
b. Set the zoom servo/manual select knob to “M.”
c. Move the zoom manually, and stop t at the
poston desred as a tele sde zoom lmt poston.
d. Press “T” sde of the zoom seesaw control lever
and the quckzoom & auto crusng zoom swtch
smultaneously for more than seconds.(refer to
Note )
─ The tele sde zoom lmt poston wll be
set.
e. Move the zoom manually, and stop t at the
poston desred as a wde sde zoom lmt poston.
f. Press “W” sde of the zoom seesaw control
lever and the quckzoom & auto crusng zoom
swtch smultaneously for more than seconds.
(refer to Note )
─ The wde sde zoom lmt poston wll be set.
Note . Before shpment at the factory, the zoom lmt postons were set at the tele end and the wde end
respectvely.
Note . Ether sde of the zoom lmt postons can be set at first.
Note . The wde sde zoom-lmt poston cannot be set to the same poston as the tele sde zoom-lmt
poston, or further toward the tele end than the tele sde zoom-lmt poston. Tele End Zoom
Operaton Range Ths s the same wth the tele sde.
Note . The zoom lmt postons wll be held even f the zoom lmt ON/OFF select swtch s set to “OFF” or
the power to the lens s turned “OFF.”
Note . When the zoom lmt poston s set, the LED located nsde the cover wll be lt. The LED wll goes out
when the zoom seesaw control lever or the quckzoom & auto crusng zoom swtchs released.
7.5.2 Zoom Limit Operation
a. If the zoom servo/manual select knob s set to “M,” change t to “S.”
b. If the zoom lmt ON/OFF select swtch s set to “OFF,” change t to “ON.”
c. By means of the zoom seesaw control lever, operate the zoom.
Whle pressng the “T” sde of the lever, the zoom moves n the tele drecton and stops at the tele lmt
poston.
Whle pressng the “W” sde of the lever, the zoom moves n the wde drecton and stops at the wde lmt
poston.
Note . Before performng a zoom lmt operaton, f the zoom poston s not wthn the range of the tele sde and
the wde sde zoom lmt postons, when the seesaw control lever s operated, the zoom wll move only
toward the zoom lmt postons, not toward the opposte sde of them.
Note . If a zoom rate demand unt that has the zoom lmt functon s connected to the lens, the valdty of the
zoom lmt functon dffers dependng on the type (dgtal or analog) of the zoom rate demand unt.
･ Wth a dgtal zoom rate demand unt, the zoom lmt functon of the zoom rate demand unt wll be
vald. The zoom lmt functon of the lens wll not work.
･ Wth an analog zoom rate demand unt, the zoom lmt functons of both the zoom rate demand unt
and the lens wll be vald. To avod a confuson of the zoom lmt postons, turn off the zoom lmt
functon of one of them.
Zoom Operation Range
Tele End
Wide End
Initial limit position
(Tele side)
Setting range of zoom limit
(Wide side)
Setting range of zoom limit
(Tele side)
Initial limit position
(Wide side)
Limit setting
Limit setting