1:3.1/12.5-400mm 1/1.8” C-Mount
F
D
32
x12.5
SR4A-CV1
付図/ILLUSTRATION/
附图
外 観 図
/ OUTLINE DRAWING
/
㾖
FCC REGURATIONS
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
CAUTION : Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Canadian Radio Interference Regulation
CAN ICES 3(B) / NMB-3(B)
CAUTION : This Class B digital apparatus complies with Canadian ICES-003.
Disposal of Electrical and Electronic Equipment in
Private Households
In the European Union, Norway, Iceland and Liechtenstein:
This symbol on the product, or in the manual, and/or on its packaging indicates that
this product shall not be treated as household waste. Instead it should be taken to an
applicable collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences
to the environment and human health, which could otherwise be caused by inappropriate waste handling
of this product.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
・
Reorient or relocate the receiving antenna.
・
Increase the separation between the equipment and receiver.
・
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
・
Consult the dealer or an experienced radio/TV technician for help.
(単位/UNIT/
单位
：mm)
スイッチ部拡大図
/ Enlarged view of switches
/
开关放大图
①
镜头外壳
②
镜头固定螺丝
③
镜头主体
④
光圈开关帽
⑤
微调钮帽
⑥
模式开关帽
⑦
C
接口
⑧
电源连接器
⑨
控制模式选择开关
⑩
模拟控制连接器
⑪
光圈控制连接器
⑫
串行通信控制连接器
⑬
指示灯
⑭
后焦距固定螺丝
⑮
ALC
微调钮
⑯
LEVEL
微调钮
⑰
模拟模式选择开关
⑱
串口模式选择开关
⑲
光圈模式选择开关
⑳
基准电源选择开关
㉑
后焦距调整用六角孔
㉒
接口锁环
レンズカバー
Lens cover
レンズ
固定ねじ
Lens fixing screw
レンズ本体
Lens body
アイリススイッチキャップ
Iris switch cap
トリマーキャップ
Trimmer cap
モードスイッチキャップ
Mode switch cap
Cマウント
C-Mount
電源コネクタ
Power supply connector
制御モード選択スイッチ
Control mode selection switch
アナログ制御コネクタ
Analog control connector
アイリス
コントロール用
コネクタ
Connector for Iris Control
シリアル通信制御コネクタ
Connector for Serial Communication Control
パイロットランプ
Pilot lamp
フランジバック固定ねじ
Flange focal length fixing screw
ALC調整トリマー
ALC adjustment trimmer
LEVEL調整トリマー
LEVEL adjustment trimmer
アナログモード選択スイッチ
Analog mode selection switch
シリアルモード選択スイッチ
Serial mode selection switch
アイリスモード選択スイッチ
Iris mode selection switch
基準電源選択スイッチ
Standard power supply selection switch
Hexagonal hole for flange focal length
adjustment
フランジバック調整用六角
穴
マウント締付環
Mount Lock Ring
■产品中有害物质的名称及含量
有害物质
部件名称
本体
外壳（金属部件）
×
○
○
○
○
○
外壳（树脂部件）
○
○
○
○
○
○
电缆部件
×
○
○
○
○
○
光学部件
×
○
○
○
○
○
基板部件
×
○
○
○
○
○
本表格依据SJ/T11364的规定编制
○：表示该有害物质在该部件所有均质材料中的含量均在 GB/T26572 规定的限量
要求以下。
×：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572 规定
的限量要求。
备注
10图形含义：此标识是适用于在中国境内销售的电子信息产品的环保使用期限。
此产品使用者只要遵守安全和使用上的注意事项，从生产之日起的十年期间
不会对环境污染，也不会对人身和财产造成重大影响。
此年限是根据安全使用期限的相关法律得出的。
铅
(Ｐｂ)
汞
（Ｈｇ）
镉
（Ｃｄ）
六价铬
（Ｃｒ (Ⅵ)）
多溴联苯
（ＰＢＢ）
多溴二苯醚
（ＰＢＤＥ）
