FujiFilm Fujica AX-1 Скачать руководство пользователя страница 6

Страница: 6 / 159

TROUBLESHOOTING

FUJICA A X - 1

The film advance lever can be turned but the shutter cannot be charged.

Wind up the film advance lever and see if the aperture lever (4 - 56) and mirror

(4 - 8) moves or not.

a. The lever (4-56) and mirror (4 - 8) move as the film advance lever is wound up.

Insufficient attracting force of the ML magnet (4-65).
Improper operation of the lever (4 - 15) or improper hook shape.

b. The lever (4 - 56) and mirror (4 - 8) do not move but the shutter still cannot be

charged

The magnet assembly (5-73) does not stop the shutter blinds.

The quick return charge lever assembly (4 - 90) has been released continuously
by the release lever (5 - 99).

The lever (4-85) does not engage with the quick return charge lever
assembly (4 -90).

The mirror does not come down

The cam plate (5-83) does not kick the release lever (5 - 99) to release the quick
return charge lever assembly (4-90).

The mirror does not rise

Apply DC 2.5V across lead wires (7 - 23 and 7 - 24) of the ML magnet

assembly (4 -65), and see if the ML magnet operates or not.

YES

The lead wire between the M - circuit board assembly (2 - 64) and

amplifier assembly (2 -13) is defective.

The coil is broken or short - circuited.

Disengaged mirror kick - up system.

LED does not light.

Refer to 16 -(1) and check the electrical circuit.

LED does not operate.

Refer to 16-(2) and check the electrical circuit.

Bulb (8) operation of the shutter is faulty.

Refer to 16 - (3) and check the electrical circuit.

magnet of the magnet assembly (5 - 73) does not stop the shutter blind.

8. AE lock does not work correctly.

Refer to 16-(4) and check the electrical circuit.

With Fujica Auto Strobo mounted and the camera set to AE, shutter speed is not set

to 1/60 sec. automatically or with the shutter speed dial set to "60x", 1/60 sec. is
not provided.

Refer to 16 - (5) and check the electrical circuit.

- 3 -

Содержание Fujica AX-1
































































































































































Результаты поиска

Содержание Fujica AX-1

Отзывы:

Похожие инструкции для Fujica AX-1

Бренды по названию

Популярные бренды

FujiFilm Fujica AX-1, Руководство по ремонту и список запчастей

Результаты поиска

Содержание Fujica AX-1

Отзывы:

Похожие инструкции для Fujica AX-1

Бренды по названию

Популярные бренды