FujiFilm FinePix6900Zoom, Руководство по обслуживанию

Страница: 24 / 143

3. Adjustment
FinePix6900ZOOM(U/E/EG) SERVICE GUIDE
24
3-3-7.Use of each command
An explanation and the use of each command when it changes the user's program.
Menu Command Content
Operation Start General operation command (starts the user program).
Stop General operation command (ends the user program).
Halt General operation command (Halts the user program temporarily).
Step 0 Do not use this command.
Exit General operation command (Closes the user program).
Program Re load Reloads the user program (*.ff).
(Be sure to reload the user program after editing.)
Select Selects the user program (*.ff).
(Selects ‘sj8.ff’ when selecting the user program.)
Edit Edits the user program (*.ff).
(Use this when it is necessary to edit the user program.)
Data ad[] Do not use this command.
rd[] Do not use this command.
SW Do not use this command.
fsw Do not use this command.
EVR EEPROM data read/write.(see 3-3-8.Reading/Writing EEPROM data)
Mode File Recording Do not use this command.
NGSTOP Stops the program if an adjustment is NG.
STEP Do not use this command.
LINE Do not use this command.
AUTO Do not use this command.
Setting OKNG clearr Do not use this command.
Customize Performs setting of each mode.
Auto Adjustment Performs ‘Auto Adjust’ settings in the user program.
Help Help This command cannot be used.
Help (FF) This command cannot be used.
FOCAS This command cannot be used.
Version Version information on the basic software.
It is possible to edit the user program, but it is possible that trouble could occur after changes are
made. So, please do not edit program unless instructed to do so.
Fx6900z.ff