FujiFilm FinePix S1500, Руководство по обслуживанию, Страница: 60 / 142

FinePix S1500 Service Manual
4-2
4. Adjustments
Confidential: FUJIFILM Service Center Use Only
4-1-2. Adjustment when replacing major parts
When replacing the LENS CONST, MAIN PWB ASSY, BATTERY PWB ASSY or FLASH BOTTOM ASSY, carry out the
adjustments marked with a

in the table below.
Carry out the adjustments sequentially from the lowest numbered items. (No adjustments are required when parts other than
those shown below are replaced.)
No
Replacing parts
Adjustment item
LENS CONST MAIN PWB ASSY
BATTERY PWB
ASSY
FLASH BOTTOM
ASSY
0 MAIN PWB Initialize
*1
   
1 LENS DATA Write
*2
 
2 Self test
  
3 Lens test
  
4 SAB_Factory test
  
5 End Voltage Adjustment
  
6 AF Adjustment
  
7 Shutter Adjustment
  
8 ISO Sensitivity Adjustment
  
9 CCD Defect Correction
  
10 Color Correction
  
11 Flash Adjustment
   
12 SAB Cali
  
13 SAB HollDisturb
  
14 USB_ID Writing

15 Language Setting

16 Firmware Download
*3
   
*1 When any of the parts requiring adjustment have been replaced, always carry out the "MAIN PWB Initialize" procedure
before performing any other adjustments.
*2 Before assembling the camera, make a note of the lens number.
*3 Always download the firmware after completing the adjustments and replace the adjustment firmware with the project
firmware.
4-2. Measuring instruments used
Measuring equipment Remarks
Regulated power supply For adjustment
PC Used for USB ID Write and operation checks (PC-AT compatible)
OS: Win XP, SP2
Brightness meter LS-110 (Minolta) or equivalent
Color temperature meter Color Meter IIIF (Minolta) or equivalent
Pattern box PTB450F