Pro-grade Performance
Other Functions
IS Pro Advanced Features
Shutter release durability - tested to
exceed approx.100,000 cycles
Shutter release boasts not only high precision but also
superb durability. A shock-absorbing mirror balancer
minimizes mirror bounce after shutter release, bringing it
instantly to a standstill while vibration suppression has
enhanced silent operation. Also improved mirror motion
speed significantly reduces image blackout.
11-point AF system for high-speed,
high-precision focusing
From IS0100 to ISO3200, select the
optimum sensitivity for any scene
Low light photography is critical to forensic and
scientific photography, that’s why the Fujifilm IS Pro
offers selectable 1/3 EV steps, with an impressive ISO
range from ISO100 to ISO3200.
When the brightness of
the subject exceeds the exposure control range in the
[P], [S] or [A] modes, or an appropriate level of exposure
cannot be achieved for the Manual [M] mode shutter
speed and aperture, it automatically adjusts sensitivity
within the range of ISO100 to 3200 for optimum
exposure.
White Balance Mode with 9 presets
White balance is less critical in UV and IR Photography,
however when shooting in visible light with a UVIR cut
filter, it’s nice to now the IS Pro offers an “Auto” mode
for automatic assessment of light sources
or select one
of the white balance presets: Incandescent Light,
Fluorescent Lamp (1-5), Fine, Flash, Shade and Color
Temperature.
For more accurate white balances the IS
Pro provides up to 5 Custom white balance settings,
and fine tuning for each white balance setting.
Face Zoom In
Face Zoom In function puts
high-accuracy face detection to work
With a press of the Face Zoom In button on the rear
panel, this function instantly and simultaneous detects
up to 10 faces in an image and zooms in for an enlarged
and sequential display of each for easy checking of
facial details, and focus on the LCD monitor. This smart
function
fills the gap in law enforcement surveillance and
portrait photography workflow.
• Single-area AF
[4 Focus Modes to Match Scene Requirements]
• Dynamic-area AF
• Dynamic-area AF with Closest Subject Priority
Solid Body
Rugged magnesium-alloy body
for extreme shooting conditions
The tough and lightweight magnesium alloy shell of the
FinePix IS Pro frees you to focus on getting the photo
and not worrying about your equipment under severe
shooting conditions. Every seam and joint has been
carefully sealed to prevent invasion of moisture and dust.
All eleven focus areas support up to F5.6, and the range
finding is effective down to -1EV of brightness.
Everything from focus accuracy to subject
compensation/tracking and response have been
enhanced by a new cutting-edge algorithm.
◎
Above image is a simulated representation.
◎
Sample photo is a simulated image
• Group Dynamic-AF
The IS Pro is a very unique DSLR as it is equipped with
a Manual Focus mode in combination with an industry
first Live Image CCD Preview Mode for focusing. Most
often alternative light wavelength photography requires
manual focusing. This is due in part to the very different
light refraction properties of the visible and IR portions
of the light spectrum as they pass through the lens. The
IS Pro’s auto focusing technology is based on Nikon’s
cutting-edge algorithms for the visible light portion of
the spectrum, while the more complex nature of unseen
UV and IR light is more suited to manual focusing aided
by a FUJIFILM’S unique Live Image Preview technology.
Complete Image
i-TTL Flash with monitor pre-flash
for precision control of flash output
When working with i-TTL-compatible outboard
flash equipment, the i-TTL flash system with
monitor pre-flash metering technology can
determine the appropriate flash output by emitting
a flash immediately prior to the shot and metering
both ambient light and the reflected light from the
primary subject with the 1,005-pixel RGB sensor.
Compared with conventional D-TTL, i-TTL
enhances the frequency and output of monitor
flash for more precise lighting. Moreover with the
attachment of a G- or D-type AF Nikkor lens and
the acquisition of subject ranging data from the
lens, it can determine the ideal flash volume.
“Function Lock” with password
protection prevents costly mishaps
Lock the command dial and button functions with
password protection to pre-empt workplace errors.
Bar-code Management Function
for easy management and
“commenting” of image files
Connect an RS-232C compatible bar-code reader*
and append various photographic remarks to
image files for more efficient image file
management and workflow.
Bar coded data from
evidence, forensic ALS
and filter setups,
automotive VIN
tags,
property
tags, mug shots,
and much more can
be cataloged along with
every picture.
Camera TIFF Processing and
RAW+JPEG Mode
Most digital SLR cameras no longer have in-camera
TIFF Processing, and instead have replaced it with RAW.
However TIFF is a highly useful option for forensic finger
print and document investigators, so the IS Pro offers an
optional in-camera TIFF processing mode. This firmware
update temporarily disables the RAW capture mode and
enables TIFF capture in a choice of three
resolutions.
Simultaneously record both RAW and
JPEG files of the same image for immediate
viewing and distribution. JPEG data can be saved
in either L (4256×2848 pixels), M (3024×2016
pixels) and S (2304×1536pixels) sizes.
＊
Special required cable sold separately.
With its powerful 1,005 pixel-RGB sensor, 3D Color
Matrix Metering II not only uses conventional exposure
algorithms but also detects highlight area size and
calculates their optimum exposure value with an
exposure assessment algorithm.
When shooting without
lens filters the combined effect of infrared and visible
light can exceed the intended visible light metering
range of the IS Pro. Slight exposure corrections are
common place in alternative light photography but are
made easier with the IS Pro’s digital LCD display with
histogram. The immediacy of this feedback makes
corrections and evaluations faster than film based UV
and IR photography methods.
3D Color Matrix Metering II for
Precision Evaluation of Lighting
Under Diverse Conditions
• Center-Weighted Metering
• Spot Metering
Built-in Pop-up Flash
with i-TTL flash control
The built-in pop-up flash features high-precision
flash output using i-TTL flash control. Ready for
advanced wireless lighting, the built-in
Commander function serves as the master for
remote wireless control of up to 2 “slaved”
groups. With a guide number of approximately
12 (ISO100 •m, 20°C), it provides view angle
coverage for an 18mm lens. Convenient
functions such as repeating flash for
multiple-exposure photography and modeling
flash for assessing overall lighting prior to
shooting are also available.
The IS Pro is compatible with all
D/G-type AF Nikkor
lenses with built-in CPU including the AF-S series,
and is also ready for manual focus Ai Nikkor lenses
and the AF-VR lenses with camera shake
correction.
For superior UV photography, a quartz lens
is highly recommended. The IS Pro’s system has
firmware settings that can accommodate older style
non-CPU based lenses, many of which retain useful
markings for IR focusing shifts.
Multi-Data Display Function for a
precise grasp of captured image data
In addition to a standard histogram display, you
can check color and brightness for each RGB
channel with the RGB histogram or receive
“washout” warnings. You can also confirm the
“active” AF focus area and other shooting details
for each captured image.
＊
Certain lens models may not be compatible or may have restrictions on their functionality.
Histogram display
AF display
Data display
Nikon F mount compatibility including
D/G types and AF Nikkor lenses
＊
Depending on the scene conditions, Face Detection performance may vary.
High-performance Viewfinder boasts
magnification of 0.94× and
approximately 95% coverage
The high-magnification viewfinder supports
comfortable
viewing
and
composition.
Photographic data and settings status are clearly
displayed in digital readout of the viewfinder. The
Vari-Brite Focus Area display aids smooth
confirmation of the selected focus area, while a
Multi-Display Screen provides a convenient grid
display.
Spacious 2.5-inch LCD with 100% coverage
With approx.230,000 pixels of resolution, the
2.5-inch low-temperature polysilicon TFT LCD
provides comfortable viewing of not only image
data but also the large characters and optimized
color scheme of the menu screens. Multi-image
playback of 9 thumbnails is just one example of its
functional versatility.
“Live View” Function for more
precise focusing and view angle setting
What sets the IS Pro apart from all infrared digital SLR
cameras is FUJIFILM’s industry first Live image preview
function. A live 30 second color or B&W image is
displayed on the LCD direct from the Super CCD SR
Pro. This unique feature enables fine tuning the focus
and composing the picture when dark opaque UV and
IR lens filers render the optical viewfinder useless. The
image can be magnified in for to confirm sharp focus
and the lightness can be adjusted to compensate for
extremely low light forensic photography. Live Image
Preview is available on the IS Pro’s LCD, and via a USB
connected PC or an NTSC/PAL video monitor.
B/W
Unfocused
Focused
©2007 Julio Sosa Biomed Studios
100-0001
MASTER
MIN
MAX
100-0798
