FujiFilm FINEPIX A400, Руководство по обслуживанию

Страница: 77 / 95

77
5. Inspection
FinePix A400 Service Manual
LCD dust/defect
check
Battery low check
Current
consumption
check
Playback
Movie
Auto mode
LCD-ON
(1) Play back a completely
black image.
(2) Play back a completely
white image.
(1) Connect the power supply
jig to the battery terminal.
(2) Set the power supply
voltage.
(3) Select Photography mode
and then select Movie
Shooting mode from the
menu screen.
(4) Set the pre-end voltage.
(5) Set the end voltage.
(1) Connect the power supply
jig to the battery terminal.
(2) Set the power supply
voltage.
(3) Turn the camera on in
Photography mode and
select AUTO.
(4) After the LCD live image
appears, check the current
consumption.
(5) Check that the flash is set
to red-eye reduction mode
and then select AUTO
mode.
Check that there are no
noticeable dust flecks or
stains (bright spots, smears,
flashing points, etc.) on the
screen.
(2) 3.0 ± 0.1 V
(4) 2.20 ± 0.05 V
Check that the battery-low
warning (pre-end) appears.
(5) 2.00 ± 0.05 V
Check that the zoom
retracts and the camera
turns off after the battery
low warning (end) appears.
(3) 3.00 ± 0.05 V
(4) 500 mA or less
Even if the above values
are exceeded, it is OK if
the current falls back into
the standard range within
10 seconds. If values
continued to exceed the
standard range for 10
seconds or longer, the
camera is NG.
(5) Backup check.
ZJ00885-100
ZJ00956-100
ZJ00956-100
Sequemnce Item Mode Preparations for adjustment
(measurement points, subject, other)
Method of adjustment
(VRs, waveforms, required values)
Measuring
equipment and jigs
Measurement points
(VRs, positions)
11
12
13
z
z
Revised: 22. Sep. 2006