25
4.3 Paper Jams
4.3
Paper Jams
If paper is jammed, the machine stops and an alarm sounds. Follow the instructions displayed on the
screen to remove the jammed paper.
Gently remove the paper being careful not to tear it. If paper is torn while it is being removed from
the machine, remove all the torn pieces making sure that none remain inside the machine.
When you have finished clearing the paper jam, printing is resumed from the state before the paper
jam occurred. If a paper jam occurred during copying, tap on [Start]. Copying is resumed from the
state before the paper jam occurred.
Note
If a paper jam occurred, check the paper jam position before pulling out a Paper Tray.
Clear the paper jams while the machine is on.
Do not touch components inside the machine. This may cause print defects.
Side Tray
1.
Remove the jammed paper.
Inside Upper Left Cover
Important
Do not touch the machine’s transfer belt (black film-like belt) inside the Upper Left Cover when you
remove the jammed paper. The image quality may be deteriorated or the transfer belt may be damaged
and need replacement.
1.
While lifting up the Release Handle, open the Upper Left
Cover.
Note
When the Side Tray is installed, remove the paper in the Side
Tray, close the Side Tray, and then open the Upper Left Cover.
When High Capacity Feeder (1 tray) is installed, hold the handle
and fully move the unit to the left.
Warning
The Fusing Unit is hot. It may cause burn injury. Do not touch this unit.