24
4 Maintenance
3.
Hold the tab at either end of the Conveyance Box, and
remove the box.
Place the removed box upright on a flat surface.
4.
Slide out the cleaning bar from the back side of the Front
Cover to clean each LED printhead.
Orient the cleaning bar with the arrow ( ↑ ) facing up, insert the
cleaning bar until it stops, and then pull it out slowly. Clean
each LED printhead by repeating the back and forth action two
to three times.
5.
Place the cleaning bar back to its original position in the back
side of the Front Cover.
6.
Return the Conveyance Box back to its original state.
Scanner
Document cover, Document Glass, film, scanner glass
For the cleaning method, see the labels on the main unit.
Wipe off any dirt with the supplied cloth about once a month.
When stains cannot be removed easily, wipe them lightly with the soft cloth slightly moistened with a
thin neutral detergent solution.
Document Feeder rollers
Clean the Document Feeder rollers about once a month.
1.
Pull up the front handle of the Top Cover of the Document
Feeder, and open the cover until it stops.
2.
While turning the rollers, wipe them with a soft cloth slightly
moistened with water.
3.
Close the Top Cover of the Document Feeder and make sure
that there is no gap on the front or rear of the cover.