FujiFilm A470, Руководство пользователя

Страница: 11 / 61

20 21
Using
the
Camera
2
20
BASIC OPERATION GUIDE
1
0 1
0 2
1 Press the “POWER” button down fully to turn the
camera on.
2 Set the Mode switch to “
B
”.
h
Focal range
Approx. 70 cm (2.3 ft.) to infinity
2
Brace your elbows against your sides and hold the
camera with both hands. Position your right thumb
so that it is handy for using the zoom.
●
!
Moving the camera while shooting gives a blurred picture
(camera shake). Use a tripod to prevent camera shake,
particularly for shots in the dark when the selected flash
mode is Suppressed flash.
●
!
There may be some uneven brightness at the lower edge of
the LCD monitor. This is normal and does not affect the
photographed image.
3
Hold the camera so that your fingers or the strap do
not cover the lens and flash. If the lens or flash is
obscured by your fingers or the strap, subjects may
be out of focus or the brightness (exposure) of your
shot may be incorrect.
●
!
Check that the lens is clean. If it is dirty, clean the lens as
informed on P.100.
●
!
If the flash is used in dusty conditions or when it is snowing,
white dots may appear in the image due to flash reflecting off
the dust particles or snowflakes. Use Suppressed flash mode
(
➡
P.38) to fix the problem.
4
Press “ T ” (telephoto) button to zoom in. Press “ W ”
(wide-angle) button to zoom out. A zoom bar
appears on the LCD monitor.
h Optical zoom focal length
(35 mm camera equivalent)
Approx. 35 mm to 105 mm
Max. zoom scale: 3
×
●
!
See P.78 for information on procedures for using Digital
zoom.
Zoom bar
N
10
●
!
Use Macro mode for subjects closer than 70 cm (2.3 ft.)
(
➡
P.36).
●
!
When [CARD ERROR], [CARD NOT INITIALIZED] or [NOT
COPIED. MEMORY FULL] appears, see P.104.
Continued
xD-Picture Card and internal memory cannot be used at the same time. Photographed images are
always recorded to xD-Picture Card when inserting xD-Picture Card into the camera.
ON ON
OFF OFF
CONT. CONT.
SET SET
OFF OFF
:
:
ERASE OK? ERASE OK?
YES YES CANCEL CANCEL
YES YES CANCEL CANCEL
ON ON
SET SET
OFF OFF ON ON
OFF OFF
:
:
SET SET
OFF OFF ON ON
OFF OFF
:
:
OFF OFF
Using the Menus
1
Displaying the menu.
Press the “MENU/OK” button.
5
Confirming the setting.
Press the “MENU/OK” button.
2 Selecting a menu option.
Press the up or down arrow
on the 4-direction button.
3 Selecting an option.
Press the right arrow on the
4-direction button.
Instructions for the next step in the procedure
appear at the bottom of the LCD monitor. Press
the button indicated.
In the right side LCD monitor, press the
“MENU/OK” button to erase the displayed frame.
To cancel erasing, press the “DISP/BACK” button.
Up, down, left and right are indicated by black triangles in the Owner’s Manual. Up or down is shown
as “
a ” or “ b ”, and left or right is shown as “ d ” or “ c ”.
◆
Displaying the on-screen Help
◆
4 Selecting a setting.
Press the up or down arrow
on the 4-direction button.
g button
Zoom button
Playback button
Photography: Press “ T ” to zoom in (telephoto).
Press “ W ” to zoom out (wide-angle).
Playback: Press “ T ” to enlarge the image.
Press “ W ” to revert to normal display.
Photography: d button Turns Macro
( ) on and off.
c button Sets the Flash
( ).
Playback: Change frame or movie frame
advance.
Press the “ ” button for about 1 second to
turn the camera on in Playback mode.
Pressing the “ ” button toggles between
Photography mode and Playback mode.
DISP/BACK button
DISP: Press this button to select the
LCD monitor display.
BACK: Press this button to stop a
procedure midway through.
Photo mode button
Photography: Select the
quality mode, sensitivity and
FinePix COLOR settings.
Playback: Specify the print
order (DPOF) settings.
TAKING PICTURES (
B
AUTO MODE)
PHOTOGRAPHY MODE