39
Printed pictures
1
When shooting a picture, hold your camera cor-
rectly so that your finger is not on the AF windows.
2
Compose the picture in the AF frame and shoot,
or shoot using AF Lock.
3
Clean the lens.
4
Hold the camera firmly and press the shutter re-
lease button gently. Use a tripod for slow shutter
speeds.
5
Select a mode other than
mode.
1
Shoot within specified coverage distance of elec-
tronic flash.
2
Do not cover the flash with your finger.
3
Turn on the back light compensation flash mode
and press the shutter release button.
●
Set date and time after replacing battery.
1
Select a date mode other than “- - - - - -” before
taking pictures.
2
Try to arrange that there is nothing light-colored
where the date appears.
20
25
40
20
30
23
20
33
10
13
12
1
Was your finger on the AF windows
when shooting?
2
Did you aim the subject properly?
3
Is the lens dirty?
4
Is the camera moving?
5
You selected
mode when shoot-
ing at a close distance.
1
Subject was too far from the camera
for flash photography in a dark place.
2
Was your finger over the flash?
3
Was the subject backlit from being
taken next to a window, etc.?
●
You didn’t set correct date and time
after replacing battery.
1
Wasn’t “- - - - - -” selected before tak-
ing pictures?
2
Is there something light-colored
(white, yellow, orange) where the date
appears?
Picture is not sharp.
Picture is too dark.
Printed date/time is in-
correct.
The date is not printed
on the front.
Problems
Possible Causes
Solutions
Page