- 6 -
Installation procedure:
1) Remove the sticker from the front panel.
3) Fill up gaps in the cabinet with sponge
or foam.
2) Put the unit into the installation hole.
● When installing the unit, it should be sl-
anted down to the back to prevent loud
noise or vibration(Slant between 6-10mm.)
(Shown at right figure.)
●
The installation place should be strong
enough to prevent loud noise or vibration.
6~10mm
Horizontal line
Installation assistance:
● Use iron support
The installation hole should be stro-
ng enough to support the air condit-
ioner.
If it cannot, iron support has to
be used outdoors. Iron support sho-
● Use sunshade board
Air c
ondi
tioner
should
avoid
anything
to be dropped into it and avoid direct
sunshine. If there is no cover on it,
you
should
contact the seller for inst-
alling the sunshade board. When in-
stalling the
sunshade
board, don’
t let
it block the air inlet at the side grille.
W
all
Wooden
frame
Sunshade
board
Rubber
plate
6~10mm
Support
Horizontal line
