- 8 -
Notes for installation
Remove
Noise
Electric wiring
Before removing the air conditioner from one place to
another, make sure to contact your nearest service center.
Moving must be done under the supervision of an
authorized technician. NOTE: This is not covered by
the standard warranty and will incur service fees.
enlargement of noise and vibration.
● Don’t put anything in front of the outlet of outdoor unit
to avoid increasing noise.
● Be sure that hot air or noise will not inconvenience neighbors.
● Please contact the seller as soon as
there is strange noise during operation.
● Please use the safety support.
● Must connect with ground reliabl
y.
●
The exclusive circuit must be used. But removable socket
can’t be used because poor contact of it can cause over heat
● Make sure to pull the power cord with care.
and leakage current is less than 30mA.
● Connecting method between air con
ditioners and power cord and intercon-
necting method of each individual element with one another should accord
with wiring diagram on the unit.
●
The air conditioner should be installed in accordance with national wiring
regulation.
●
An all-pole disconnection switch having a contact separation of at least 3mm
●
Air switch (thermal-magnetic breaker) should be installed in the circuit.
● If the supply cord is damaged,it must be replaced by the manu
facturer or
●
All the electrical work must be done according to the local wiring regulations.
