Fuji Xerox Versant 80 Press, Руководство пользователя

Страница: 372 / 1019

11 Job Status
372
Job St
a
tu
s
11
• When the orientation of booklet creation cannot be detected, "Booklet Creation" is displayed only.
„
Print
Prints the Delayed Print job. After printing, the job is deleted. If printed manually, the job
will not be printed at the specified time.
Refer to "When [Print] is Selected" (P.372).
When [Print] is Selected
1
Select [Yes].
Note • The screen as shown on the right does not
appear if [Print Job Confirmation Screen] is
set to [Disabled] in the System
Administration mode. If [Disabled] is
selected, the machine automatically deletes
the job after printing without displaying the
confirmation screen. For more information,
refer to "Print Job Confirmation Screen"
(P.514).
„
Yes
Starts printing the job. After printing, the job is deleted.
„
No
Cancels printing the job.
Charge Print
This feature authenticates users on the machine to prevent unauthorized users from
operating print jobs. When this feature is enabled, the machine prints only the jobs of
authenticated users. You can also configure the machine to store print jobs temporarily, and
then print them from the machine’s control panel.
If received print jobs are set to be saved as Charge Print under [Tools] > [Authentication/
Security Settings] > [Authentication] > [Charge/Private Print Settings] > [Receive Control],
the jobs are saved for each Billing ID. Any jobs that were not given a Billing ID on the print
driver are saved in [No User ID].
For more information on how to register user IDs on the machine, refer to "Create/View User Accounts" (P.536).
Note •
Unlike the Private Charge Print feature, the Charge Print feature can store jobs without a user ID,
such as e-mail printing and print jobs sent from ContentsBridge or CentreWare Internet Services,
and can print the jobs after authenticating users.
• [Charge Print] appears when [Save as Charge Print Job] is selected by using one of the following
procedures in the System Administration mode:
- Select [Save as Charge Print Job] in [Receive Control].
- Select [According to Print Auditron] in [Receive Control], and then select [Save as Charge Print Job]
in [Job Login Failure].
- Select [According to Print Auditron] or [Save as Private Charge Print Job] in [Receive Control], and
then select [Save as Charge Print Job] in [Job without User ID].
• When you select the paper type from the Multi-model Print Driver 2 and execute a print job, the
paper type is converted to the paper type which is supported on your machine and the job will be
started. For information on how to convert paper types, refer to "Print Features Using Authentication
Information" (P.386).
For information on how to set Charge Print, refer to "Charge/Private Print Settings" (P.549).
The following describes how to print and delete a job stored with the Charge Print feature.