Fuji Xerox DocuPrint P365 d, Руководство пользователя

Страница: 97 / 217

Printing Basics
97

Printing Custom Size Paper
This section explains how to print on custom size paper using the print driver.
The way to load custom size paper is the same as the one to load standard size paper.
NOTE:
•
You can use custom size paper between the following ranges:
•
For the standard 250 sheet tray, the optional 550 sheet feeder, and the bypass tray (duplex print)
-
Width: 139.7 mm (5.5 inches) to 215.9 mm (8.5 inches)
-
Length: 210 mm (8.27 inches) to 355.6 mm (14 inches)
•
For the bypass tray
-
Width: 76.2 mm (3 inches) to 215.9 mm (8.5 inches)
-
Length: 127 mm (5 inches) to 355.6 mm (14 inches)
•
XML Paper Specification (XPS) driver does not support custom size paper.
See also:
•
"Loading Print Media in the Standard 250 Sheet Tray and the Optional 550 Sheet Feeder" on page 78
•
"Loading Print Media in the Bypass Tray" on page 80
•
"Setting Paper Sizes and Types" on page 88
Defining Custom Paper Sizes
Before printing, set the custom size on the print driver.
NOTE:
•
When setting the paper size on the print driver and the operator panel, be sure to specify the same size as the actual print media
used. Setting the wrong size for printing can cause printer failure. This is especially true if you configure a bigger size when using a
narrow width paper.
Watermark
•
Watermark
–
Edit
–
Delete
–
New
•
Print on Page 1 only
•
Defaults
Printer Features
•
Feature Sets: General
–
Feed Orientation
–
Paper Type
–
Substitute Tray
–
Custom Paper Auto Orientation
–
Draft Mode
–
Skip Blank Pages
–
Halftone Screen Lock
–
Image Quality
–
Halftone
–
Letterhead Duplex Mode
•
Feature Sets: Color Balance K
–
Low Density (K)
–
Medium Density (K)
–
High Density (K)
Summary
Item Printing Options